Cisco RV325
Aller à la navigation
Aller à la recherche
Configuration d'OpenSwan
Installation
Fichier ipsec.conf
config setup
conn %default
authby=secret
type=tunnel
left=<adresse_IP_Publique_serveur_OpenSwan>
leftid=openswan@vpn
leftsubnet=<reseau_local>
leftsourceip=<adresse_IP_locale_serveur_OpenSwan>
conn vpn.reseau-destination.com
auto=add
# leftnexthop=eth0 #uncomment this line if both ends of the VPN are in the same WAN subnet
right=<adresse_IP_Publique_passerelle_VPN_destination>
rightsubnet=<reseau_local_passerelle_VPN_distante>
rightsourceip=<adresse_IP_locale_passerelle_VPN_distante>
rightid=cisco@vpn
dpdtimeout=120
dpddelay=30
dpdaction=hold # alternatves: restart_by_peer, restart, clear, hold
rekey=no
esp=3des-md5-modp1024
ike=3des-md5-modp1024
keyexchange=ike
Fichier ipsec.secrets
<adresse_IP_Publique_serveur_OpenSwan> %any : PSK "maclepartagee"